2015年10月15日 星期四

Publication List

Journal Papers

1.   Wei, C.C.*, Horng, J.H. and Lin J.F. 2012, " Thermal Analysis of a Ball-Screw System," Advanced Materials Research, Vols. 591-593, pp.818-826.( EI, ISSN: 1022-6680)
2.   Wei, C.C.*, Liou, W.L., and Lai R.S., 2012, "Wear Analysis of the Offset Type Preloaded Ball-Screw at High Speed," Wear, Vol.292-293, pp.111-123. (SCI).
3.   Wei, C.C.*, Horng, J.H., 2012, " Analyses of Material Properties of Nitrided AISI M2 Steel Treated by Plasma Immersion Ion Implantation (PIII) Process," Advanced Science Letters, Vol.12, pp.84-89.( SCIE, IF 1.253, ISSN: 1936-6612)
4.   Wei, C.C.*, Horng, J.H., 2012, "Vibration Analysis and Transmission for High Speed Ball Screw," Advanced Science Letters, Vol.12, pp.148-154. (SCIE, IF 1.253, ISSN: 1936-6612)
5.   Wei, C.C.*, Liou, W.L., and Lai R.S., 2011, "Wear Analysis of the Offset Type Preloaded Ball Screw," Tribology International, Submitted (SCI).
6.   Wei, C.C.* and Lai R.S., 2011, "Kinematical Analyses and Transmission Efficiency of a Preloaded Ball Screw Operating at High Rotational Speeds," Mechanism and Machine Theory, Impressed (SCI).
7.   Wei, C.C.*, Horng, J.H., Lee, A. C., and Lin, J.F., 2011, "Analyses and Experimental Confirmation of Removal Performance of Silicon Oxide Film in the Chemical Mechanical Polishing (CMP) Process with Pattern Geometry of Concentric Groove Pads," Wear, Vol.270, pp.172-180. (SCI)
8.   Horng J.H., Wei, C.C., Chen Y.Y., and Chang, Y.P., 2010, "The Microcontact Analysis of Contact Length between Wheel and Workpiece in Precise Grinding", Advance Material Research. (EI)
9.   Horng J.H., Wei, C.C., Chen Y.Y., Huang, C.H., 2009, "Contact Friction Analysis of Silicon Material ",Journal of Lecture Notes in Engineering and Computer Science, Vol.2175, No.1, pp1765-1768.
10.    Wei, C.C.*, Lin J.F., and Horng, J.H., 2009, "Analysis of a Ball Screw with a Preload and Lubrication, " Tribology International, Vol.42, pp.1816-1831 (SCI).
11.    Horng J.H.*, Wei, C.C., Tsai H.J. and Shiu B.C., 2009, "A study of surface friction and particle friction between rough surfaces," Wear, Vol.267, pp. 1257-1263.(SCI)
12.    Wei, C.C. *, Chang, W.H., Tsai, W.F., Lin, C.P., and Yang, W.G., 2009, "The Research of Cutting Rate for Dental Drill Treated by Plasma Immersion Ion Implantation Nitriding (PIII&N) Process," Journal of Advanced Engineering, Vol. 4, No. 2, pp. 105-111.
13.    Wei, C.C.*, Horng, J.H., and Lin, J.F., 2007, "Dynamic Analysis of a Ball Screw with Double Cycle Balls and a Single Nut," Machine Design and Research, 19, pp.177-181.(EI)
14.    Lin J.F., Chung K.W., Xie J.Q., Wei, C.C., Chung J.C., Li M.Y., and Ai C.F., 2007, "Effects of implantation temperature and volume flow rate ratio of nitrogen and hydrogen on nitrogen concentration distribution, mechanical properties, fatigue life, fracture toughness, and tribological behavior of plasma-nitrided P20, 718 and 420 steels," Surface and Coating Technology, 197, pp.28-38.(SCI)
15.    Lin J.F., Chung K.W., Wei, C.C., and Ai C.F., 2005, "The effects of differing nitrogen implantation conditions on penetration depth, mechanical properties, and tribological behavior of plasma-nitrided AISI 304 stainless steel," Surface and Coating Technology, 197, pp.28-38.(SCI)
16.    Lin J.F., Wei, C.C., Yung Y.K., and Ai C.F., 2004, "The Effects of Hydrogenated Carbon Films with Different Film Thickness and Nitrogen Content on Specimen Mechanical Properties, Scratch Critical Load, Adhesion Work, and Tribological Behavior," Diamond and Related Materials, 13, pp.1895-1906.(SCI)
17.    Wei, C.C., and Lin, J.F.*, 2003, "Kinematic Analysis of the Ball Screw Mechanism Considering Variable Contact Angles and Elastic Deformations," ASME, J. Mech. Design, 125, pp.717-733.(SCI)

Conference Papers

1.     Wei, C.C.*and Horng, J.H., 2013 Sep. 6, "Thermal analysis of a single nut preloaded ball screw, " 40th Leeds-Lyon Symposium on Tribology.
2.     Wei, C.C.*, Horng, J.H. and Lin J.F., 2012 Nov. 16, "Thermal Analysis of a Ball-Screw System," ICMEA2012, Guangzhou.
3.     Wei C. C.*, 2011 Nov. 20. "Material Properties of AISI M2 Steel Treated by PIII&N Process," ICMMP2011, Guangzhou.
4.     Wei C. C.*, and Horng J. H., 2011 Nov. 20. "Vibration Analysis and Transmission for High Speed Ball Screw," ICMMP2011, Guangzhou.
5.     Wei C. C.*, and Horng J. H., 2011 Apr. 03, "An Exploration of Mechanical and Wear Properties of Nitriding Layers in SKS3 and SKH51 Tool Steels by Plasma Immersion Ion Implantation Nitriding (PIII&N) Treatment," 18th International Conference on Wear Materials.
6.     Horng J. H., Wei C. C., Chern C.Y., and Wu C.H., 2010 Sep. 09, "Fractal friction model for elliptic rough surfaces," 37th Leeds-Lyon Symposium on Tribology
7.     Wei C. C.*, and Horng J. H., 2010 Sep. 09, "Analysis of using life of an offset type preloaded ball screw," 37th Leeds-Lyon Symposium on Tribology.
8.     Jeng-Haur Horng, C. C. Wei, and C. H. Wu, 2010, "The Effect of Material Properties on Fractal Microcontact Analysis of Elliptic Surface Peaks with Hard Coating Film," VI International Symposium on Tribo-Fatigue (accepted).
9.     Horng J.H., Wei C. C., and Chen Y. Y. ,2010, "Contact and Adhesion Characterization of Coating Film for Elliptical Surface Topography, " WCCM/APCOM 2010, July pp.19-23, Sydney Australia.
10.  Horng J.H., Wei C. C., Chen Y. Y., Wu C. H., 2010 "Tribological Characterization of Hard Coating Film for Elliptical Surface Peak", Materials Science and Engineering, Vol.10, No.2. 2010(accepted)
11.  Horng J.H., Chern S.Y., Wei C.C., Chang Y.P., Wu C.J.,2010, "Experimental Simulation of Tribolgical Study for the Mechanism in a High Speed-Heavy Load Ball Screw", WCE2010, June 30- July 2, pp1034-1040, London, U.K
12.  Horng J.H., Jeng Y.R., Wei C.C., Tasi Y.T., 2010 "Antibacterial and Tribological Behavior of Self-assembled Monolayer on Optical Lens", The 5th International Symposium on AOMATT2010 April 26-29, Dalian, China.
13.  Horng J.H., Wei C.C., Ye Y.L. and Huang C.H., 2010, "A Study of Surface Force on Self-Assembled Monolayer of Bio-Microchannel", ICCES'10 Las Vegas Mar 28- Apr 1, Las Vegas, USA.
14.  Horng J. H., Jeng Y.R., Chang Y.C., Wei C.C., Chen Y.Y., 2010 " Tribological Behavior of Self-Assembled Monolayer on Artificial Teeth", ICAM2010 February 2-5, Kenting, Taiwan.
15.  Wei C. C.*, Horng J. H., 2010 Jan. 19, "Kinematic and Friction Analyses of a Ball Screw with a Preload and the EHL Lubrication Model," 17th International Colloquium Tribology – Solving friction and wear problem, Technische Akademie Esslinge, Germany.
16.  Wei C. C.*, Horng J. H., 2010 Jan. 21, " Analysis and Experiment of Removal Performance with Various Concentric Grooves on Pads in Chemical Mechanical Polishing," 17th International Colloquium Tribology – Solving friction and wear problem, Technische Akademie Esslinge, Germany.
17.  Jeng-Haur Horng, Chin-Chung Wei, Yang-Yuan Chen, Chan-Hui Huang, 2009, " Contact Friction Analysis of Silicon Material ", IMECS 2009.
18.  Wei C. C.*, Horng J. H., 2009 Sep. 6, " The Research of Cutting Rate for Dental Drills Treated by Plasma Immersion Ion Implantation (PIII) Nitriding Process, " World Tribology Conference, Kyoto, Japan.
19.  Horng J. H.*, Wei C. C., 2009 Sep. 6, " The Effect of Adhesion and Hardness on Friction Behavior for Elliptic Rough Surfaces, " World Tribology Conference, Kyoto, Japan.
20.  Horng J. H.*, and Wei C. C., 2009 Apr., "The Effect of Adhesion and Hardness of Coating Film on Contact Behavior for Elliptic Rough Surface," CMES2009, Puket, Thiland.
21.  Wei C. C.*, and Horng J. H., 2008 Sep., "Analysis of a Three-Body Contacting Model with the Adhesive Effect," CIST2008 and ITS-IFToMM2008, Beijing, China.
22.  Horng J. H.*, and Wei C. C., 2008 Sep., "Analysis of Three-Body Contacting Model with Scale Effect," CIST2008 and ITS-IFToMM2008, Beijing, China.
23.  Wei C. C.*, Horng J. H., and Lin, J.F., 2008 Sep., "Kinematic Analyses of a Ball Screw with Considering the Preload and Lubrication effects," 35th Leeds-Lyon Symposium on Tribology.
24.  Horng J. H., Wei C. C., and Shiu B. C., 2008 Aug., "The analyses of a new three body friction model with multi-scale and adhesive effects in the micro-contact situation," 8th. World Congress on Computational Mechanics (WCCM8) 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) June 30 – July 5, 2008 Venice, Italy.

25.  Wei, C.C.*, Lee, S.C., Lee, C.C., Ai, C.F., and Cheng, K.C., 2005,”An Exploration of Mechanical Properties of Nitriding Layers in Tool Steels by Plasma Immersion Ion Implantation Treatments”, The Fourth Asia-Pacific International Symposium on the Basic and Application of Plasma.

Curriculum Vitae

I am Chin-Chung Wei, an Associate Professor of the Department of Power Mechanical Engineering of the National Formosa University. I got mechanical engineering Ph.D from National Cheng Kung University of Taiwan. My first job was a post doctor in my adviser’s laboratory 14 months. From 10/2004-07/2007, I worked as an engineer at the Institute of Nuclear Energy Research located at Taoyuan, Taiwan. My main works were metal plasma nitriding and properties measurement.
Now, I teach several courses in the college, including Fluid Mechanics, Fluid Mechanical Experiment, Plasma Engineering, Mechanical Design and Micro-Nano Fabrication and Measurement. My professional regions are the precision mechanism driven by ball-screw, micro-nano fabrication and measurement, and plasma engineering and application. Present research is major in the precision mechanism, including the transmission performance of a high speed ball screw, wear properties and geometry design of polishing pad used in the chemical mechanical polishing (CMP), and material modification applied in anti-wear and friction. I had publication 17 international journal manuscripts and 25 international conference papers.